WASHINGTON — NASA‘s Mars rover Perseverance has failed in its first attempt to grab rock samples on Mars for future return to Earth.
The car-sized Perseverance landed inside the Red Planet’s Jezero Crater this past February to search for signs of ancient microbial life.
The American space agency, in a statement, said that data sent to Earth by NASA’s Perseverance rover after its first attempt to collect a rock sample on Mars and seal it in a sample tube indicate that it didn’t collect rocks during the initial sampling activity.
“While this is not the ‘hole-in-one we hoped for, there is always a risk with breaking new ground,” said Thomas Zurbuchen, associate administrator of NASA’s Science Mission Directorate in Washington.
“I’m confident we have the right team working this, and we will persevere toward a solution to ensure future success.”
The rover carries 43 titanium sample tubes and is exploring Jezero Crater, where it will be gathering samples of rock and regolith (broken gravel and dust) for future analysis on Earth.
Perseverance’s Sampling and Caching System uses a hollow coring bit and a percussive drill to extract samples at the end of its 7-foot-long (2-meter-long) robotic arm.
Telemetry from the rover indicates that the drill and bit were engaged as planned during its first coring attempt, and post-coring, the sample tube was processed as intended.
“The sampling process is autonomous from beginning to end,” said Jessica Samuels, the surface mission manager for Perseverance at NASA’s Jet Propulsion Laboratory in Southern California.
“One of the steps that occur after placing a probe into the collection tube is to measure the volume of the sample. The probe did not encounter the expected resistance that would be there if a sample were inside the tube.”
The Perseverance mission is assembling a response team to analyze the data. One early step will be to use the WATSON (Wide Angle Topographic Sensor for Operations and Engineering) imager — located at the end of the robotic arm — to take close-up pictures of the borehole.
Once the team understands what happened, it will ascertain when to schedule the next sample collection attempt.
“The initial thinking is that the empty tube is more likely a result of the rock target not reacting the way we expected during coring, and less likely a hardware issue with the Sampling and Caching System,” said Jennifer Trosper, project manager for Perseverance at Jet Propulsion Laboratory.
“Over the next few days, the team will be spending more time analyzing the data we have and also acquiring some additional diagnostic data to support understanding the root cause for the empty tube.”
Previous NASA missions on Mars have also encountered surprising rock and regolith properties during sample collection and other activities.
In 2008, the Phoenix mission sampled soil that was “sticky” and difficult to move into onboard science instruments, resulting in multiple tries before success.
Curiosity has drilled into rocks that turned out to be more rigid and more brittle than expected. Most recently, the heat probe on the InSight lander, known as the “mole,” could not penetrate the Martian surface as planned.
“I have been on every Mars rover mission since the beginning, and this planet is always teaching us what we don’t know about it,” said Trosper.
“One thing I’ve found is, it’s not unusual to have complications during complex, first-time activities.”
Perseverance explores two geologic units containing Jezero Crater’s most profound and ancient layers of exposed bedrock and other intriguing geologic features.
The first unit, called the “Crater Floor Fractured Rough,” is the floor of Jezero.
The adjacent unit, named “Seitah” (meaning “amidst the sand” in the Navajo language), has Mars bedrock as well and is also home to ridges, layered rocks, and dunes.
The Perseverance science team recently began using color images from the Ingenuity Mars Helicopter to help scout for areas of potential scientific interest and look for potential hazards.
Ingenuity completed its 11th flight Wednesday, traveling about 1,250 feet downrange of its current location to provide the project aerial surveillance of the southern Seitah area.
The rover’s initial science foray, which spans hundreds of sols (or Martian days), will be complete when Perseverance returns to its landing site.
At that point, Perseverance will have traveled between 1.6 and 3.1 miles (2.5 and 5 kilometers) and may fill up to eight of its sample tubes.
(With inputs from ANI)
Edited by Abinaya Vijayaraghavan and Praveen Pramod Tewari
The post Rover And Out: NASA’s Mars Rolling Lab Fails To Collect Rock Samples appeared first on Zenger News.